CopperZilla 2.0 is a high performance cooling upgrade designed exclusively for Bitaxe Gamma miners, delivering significantly improved thermal handling, higher sustained hashrates, and enhanced long term stability through an all copper heatsink design.
Extreme Copper Cooling for Bitaxe Gamma
The CopperZilla 2.0 is engineered to push the thermal limits of the Bitaxe Gamma by using a massive solid copper heatsink combined with dual heatpipes and a high efficiency 60 mm fan.
This design rapidly absorbs and redistributes heat away from the ASIC, allowing the miner to operate more efficiently under higher power settings while maintaining stable temperatures.
Improved Performance
With its 210 g solid copper construction, CopperZilla 2.0 provides exceptional thermal mass and heat absorption capability. Heat is efficiently transferred through dual heatpipes and actively removed by the integrated fan system.
The result is improved thermal stability and the ability to sustain higher operating frequencies compared to standard cooling solutions.
Performance Modes
Silent Mode
750 MHz / 1200 mV → ~1.5 TH/s
Designed for quieter operation with reduced fan speed while still delivering significantly improved performance over stock cooling.
Performance Mode
1000 MHz / 1300 mV → ~2 TH/s
Maximum output configuration for users aiming to extract the highest possible hashrate from the Bitaxe Gamma.
Overclocking increases performance but requires careful tuning to maintain safe operating temperatures.
Compatibility
The CopperZilla 2.0 is designed exclusively for the Bitaxe Gamma.
Not compatible with:
- Older Bitaxe models
- NerdAxe devices
Easy Installation
Installation is quick and straightforward with no complex modifications required.
- Secure backplate mounting system for stable contact pressure
- All mounting hardware included
- No soldering or permanent modifications required
Simply install the cooler, adjust settings in AxeOS, and optimize your hashrate.
Technical Design
CopperZilla 2.0 is the result of focused engineering for Bitaxe thermal optimization, not a repurposed off-the-shelf solution.
- 210 g solid copper heatsink for maximum thermal absorption
- Dual heatpipe architecture for efficient heat distribution
- 60 mm high performance fan for active cooling
- Rigid backplate mounting for improved stability and contact
What’s Included
- 1× CopperZilla 2.0 heatsink with 60 mm fan
- 4× standoffs
- 4× hex nuts
- 1× mounting backplate
- 1× hex screw tool
Not Included
- Thermal paste
- Bitaxe Gamma miner
- Power supply
Installation Note
For best thermal performance, it is recommended to replace the thermal paste during installation. This ensures optimal heat transfer between the ASIC and the CopperZilla 2.0 heatsink.
